Waterproofing, epoxy and ESD flooring and decorative finishes in Penang, on the island and the mainland: Rayson materials, installed by an independent, Rayson-authorised applicator that quotes per square foot after inspection.
Production and warehouse floors for trolleys and forklifts, ESD floors for electronics assembly and test, and factory roofs that leak at laps, gutters and skylights, worked in sections so the plant keeps running.
Terrace and semi-detached roofs, toilets that stain the ceiling below, balconies and car porches, from George Town and Bayan Baru to Butterworth and Bukit Mertajam.
Shop and café floors fitted out against an opening date, and shophouse roofs and walls where the source of a leak is found before anything is opened.
Roofs, toilets, balconies, walls and ceilings: the leak traced first, then the Rayson membrane that fits.
Factory, warehouse, car park, shop and home floors, with the system specified for the traffic.
Conductive epoxy for electronics plants and data rooms, measured after cure.
IFS microcement, poured terrazzo, polished concrete and epoxy flake or metallic floors, laid here over Rayson layers.
The IFS range over Rayson layers, laid by the Rayson-authorised applicator in Penang. Each finish has its own page: what goes underneath, how the job runs and what decides the price.
Seamless IFS MicroCrete® for condo bathrooms, floors and walls, with Rayson waterproofing under every wet area.
Dry rooms: PrimeBond E20 on concrete or screed, or a bonding primer over firmly bonded tiles, in place of the membrane.
Quoted after inspectionThe polished concrete and simen kilat look over the floor you already have: the IFS overlay, or IFS’s polished concrete slab for a new floor.
A new floor: IFS polished concrete slab, at least 25 mm (IFS). Wet areas: the applicator confirms whether SealForce WB20 goes underneath first.
Quoted after inspectionIFS Japanese terrazzo, poured in place with no grout lines, for homes, lobbies and shops, on a base prepared with Rayson materials.
Speckled epoxy flake and seamless metallic epoxy floors from the IFS range, for homes, garages and showrooms, over Rayson primer.
Firmly bonded tiles: grout lines filled and a bonding primer first.
Quoted after inspectionThe problem, the area around it and what is above or below it, by WhatsApp or the form.
The system, the preparation and the data sheets, in writing.
The authorised applicator in Penang visits, confirms the cause and quotes per square foot.
A flood test or rain check for waterproofing, cure times for floors; two warranties, from two companies.
Yes: Penang island and Seberang Perai on the mainland. Larger jobs elsewhere in the north are confirmed per enquiry.
Yes. Rayson StaticGuard CX90 conductive epoxy is specified to the plant’s ESD programme and installed over grounding points; its resistance is measured after cure and recorded for the plant.
An independent, Rayson-authorised applicator that works in Penang. It contracts with you, quotes, invoices and warrants the workmanship; Rayson warrants the material and is not the installer or a party to the installation contract.
It is quoted per square foot after inspection: the surface, the system, the access and the area decide the price. Rayson publishes no price list.
Yes. IFS MicroCrete® microcement, Japanese terrazzo poured in place, stone carpet, epoxy flake and metallic epoxy, and the polished concrete overlay are installed in Penang by the Rayson-authorised applicator there, over Rayson layers and after a sample board.
Yes. Contractors with their own crews can order Rayson materials with the data sheets and application guidance; say so in the form.
Tell us what the surface is, where it is and what it has to withstand. Rayson replies with a system recommendation; for installation, the applicator for your area in Johor, Kuala Lumpur or Penang is introduced to quote the job.
Malaysia launch: 1 March 2027. Enquiries are welcome now; supply, site assessment and installation timing are confirmed for each project.