Epoxy flooring, waterproofing, microcement and other decorative finishes in Kuala Lumpur and Selangor, including Petaling Jaya, Shah Alam and Subang: Rayson materials for condos, homes, shops and factories, installed by an independent, Rayson-authorised applicator that quotes per square foot after inspection.
A toilet or balcony that leaks into the unit below, a planter box against a bedroom wall, a podium or roof the management office wants resealed. Work inside a strata building is planned with the management office before it starts.
Flat roofs and car porch roofs that pond after afternoon storms, damp walls on the weather side, and garage, kitchen and porch floors that need a seamless epoxy finish.
Factory and warehouse floors for trolleys and forklifts in Shah Alam, Subang Jaya and Petaling Jaya, factory roofs that leak at laps and gutters, car park decks, and shop and café floors fitted out against an opening date.
Roofs, toilets, balconies, walls and ceilings: the leak traced first, then the Rayson membrane that fits.
Factory, warehouse, car park, shop and home floors, with the system specified for the traffic.
IFS microcement, poured terrazzo, polished concrete and epoxy flake or metallic floors, laid here over Rayson layers.
The IFS range over Rayson layers, laid by the Rayson-authorised applicator in Kuala Lumpur and the Klang Valley. Each finish has its own page: what goes underneath, how the job runs and what decides the price.
Seamless IFS MicroCrete® for condo bathrooms, floors and walls, with Rayson waterproofing under every wet area.
Dry rooms: PrimeBond E20 on concrete or screed, or a bonding primer over firmly bonded tiles, in place of the membrane.
Quoted after inspectionThe polished concrete and simen kilat look over the floor you already have: the IFS overlay, or IFS’s polished concrete slab for a new floor.
A new floor: IFS polished concrete slab, at least 25 mm (IFS). Wet areas: the applicator confirms whether SealForce WB20 goes underneath first.
Quoted after inspectionIFS Japanese terrazzo, poured in place with no grout lines, for homes, lobbies and shops, on a base prepared with Rayson materials.
Speckled epoxy flake and seamless metallic epoxy floors from the IFS range, for homes, garages and showrooms, over Rayson primer.
Firmly bonded tiles: grout lines filled and a bonding primer first.
Quoted after inspectionThe problem, the area around it and what is above or below it, by WhatsApp or the form.
The system, the preparation and the data sheets, in writing.
The authorised applicator in Kuala Lumpur and the Klang Valley visits, confirms the cause and quotes per square foot.
A flood test or rain check for waterproofing, cure times for floors; two warranties, from two companies.
Kuala Lumpur and the Klang Valley around it, including Petaling Jaya, Shah Alam, Subang Jaya and the surrounding areas. Jobs further out are confirmed per enquiry, depending on the applicator’s schedule and the size of the job.
Yes. The applicator plans the work with the management office before it starts: access, working hours, protection of the common areas and any permit the building asks for.
An independent, Rayson-authorised applicator that works in Kuala Lumpur and the Klang Valley. It contracts with you, quotes, invoices and warrants the workmanship; Rayson warrants the material and is not the installer or a party to the installation contract.
It is quoted per square foot after inspection: the surface, the system, the access and the area decide the price. Rayson publishes no price list.
Yes. IFS MicroCrete® microcement, Japanese terrazzo poured in place, stone carpet, epoxy flake and metallic epoxy, and the polished concrete overlay are installed in Kuala Lumpur and the Klang Valley by the Rayson-authorised applicator there, over Rayson layers and after a sample board.
Yes. Contractors with their own crews can order Rayson materials with the data sheets and application guidance; say so in the form.
Tell us what the surface is, where it is and what it has to withstand. Rayson replies with a system recommendation; for installation, the applicator for your area in Johor, Kuala Lumpur or Penang is introduced to quote the job.
Malaysia launch: 1 March 2027. Enquiries are welcome now; supply, site assessment and installation timing are confirmed for each project.