Sports court colour system
- Repair cracks and depressions and correct ponding areas
- Apply minimum 2 coats of Rayson CourtFlex AC25 in the court colour scheme
- Overcoat dull patches for uniform colour, then apply line marking
Rayson CourtFlex · Acrylic
Rayson CourtFlex AC25
Rayson CourtFlex AC25 is a single-component, water-based, self-crosslinking acrylic co-polymer coating for sports courts and decorative concrete and masonry surfaces, forming a stain-resistant, easy-to-clean film.
ConcreteCement screedWallsRoofs TDS RY-TDS-1001
Best for
Best for colour-coating outdoor sports courts, playgrounds and decorative concrete and masonry with a durable, non-yellowing acrylic finish.
CourtFlex AC25 is the colour coat of the Rayson sports range. The water-based acrylic co-polymer self-crosslinks as it dries, forming a surface film with excellent water resistance, durability, low dirt pick-up and stain resistance that keeps courts cleanable and bright.
It applies by brush or roller to concrete, stone, limestone, unglazed tiles, pavers, roof tiles and masonry or brick walls — covering basketball courts, playgrounds, decorative concrete and wall surfaces in one product family. The film is non-yellowing and suitable for interior and exterior use, with good water repellence and balanced hardness for surfaces that take footwear traffic.
A standard court build-up is a minimum of two coats, with dull patches receiving a further coat for uniform colour. Line marking and sport-specific texturing complete the system.
In Malaysia
Supplied by Epovex Coatings Sdn. Bhd., Company No. 202601042128 (1704223-A). The Malaysia launch is scheduled for 1 March 2027; confirm availability and lead time for your project. Installation through an authorised applicator in Johor, Kuala Lumpur or Penang introduced by Rayson, who quotes and warrants the workmanship, or by your own crew with Rayson’s application guidance.
Send an enquiryKey benefits
- Excellent water resistance and outdoor durability
- Self-crosslinking film — stain-resistant and easy to clean
- Non-yellowing colour for interior and exterior use
- Single component, ready to use by brush or roller
Recommended uses
- Basketball, tennis and multi-purpose courts
- Playgrounds and recreational surfaces
- Decorative concrete, pavers and unglazed tiles
- Masonry and brick walls; roof tiles
Application
- Brush
- Roller
| Specification | Data sheet value |
|---|---|
| Mixing | Single component, ready to use; stir before application |
| Pack sizes | 20 L plastic pail |
Typical systems
Anti-slip recreational surface
- Prime and texture with Rayson GripSafe AP12
- Finish with Rayson CourtFlex AC25 in the selected colours
Limitations
- Material temperature 15–25 °C; ambient and surface temperature above 10 °C and at least 5 °C above the dew point
- Surface must be dry, clean and free of loose paint, dust, grease, oil, wax and biological growth
- Allow generous cure before play; confirm drying and full-cure times with our technical team
- Check falls and drainage before coating — ponding shortens the life of any court surface
Not suitable for
- Heavy vehicle traffic or industrial floors
- Glazed tiles or sealed surfaces without specialist preparation
- Areas with standing water or unresolved ponding
- Chemical exposure areas
Used with
Jobs and industries
Jobs that use Rayson CourtFlex AC25
Rayson-authorised applicators in Johor, Kuala Lumpur and Penang install Rayson CourtFlex AC25 on these jobs and in these industries; its layer is marked in each build-up. Each page shows how the work runs, what to send for a quotation and what decides the price.
Floor systems, laid by an applicator or bought direct
All floor systems ↗ 01 Rayson system
Sports court painting
Basketball, tennis and multi-purpose courts and playgrounds coated in CourtFlex AC25, with GripSafe AP12 texture and UraForce HY15 for walkways; laid or sold direct.
- CourtFlex AC25 court colour, at least two coats
- GripSafe AP12 texture, where the court needs grip
- Concrete or asphalt court, cracks and ponding repaired
Line marking after the colour coats. Playgrounds and walkways: UraForce HY15 over GripSafe AP12.
Quoted after inspectionBy industry, across Malaysia
Industries we cover ↗ 02 Rayson system
School and kindergarten floors
Classrooms, corridors, halls, walkways, playgrounds, courts, toilets, canteens and roofs in schools and kindergartens, done in the school holidays.
- UraForce WB58 topcoat, colour-stable
- FloorGuard R50 epoxy in a colour from the range
- PrimeBond E20 epoxy primer
- Concrete floor, keyed and repaired
Walkways, ramps and playgrounds: GripSafe AP12, coloured with UraForce HY15. Courts: CourtFlex AC25. Toilets: SealForce WB20 under the tiles.
Quoted after inspection The practical details
Rayson CourtFlex AC25: questions people ask
How many coats does a court need?
A minimum of two coats for uniform colour and film build, with dull patches receiving a further coat. Heavily used courts benefit from a planned recoat cycle.
Will the colour fade in the sun?
The acrylic film is non-yellowing and formulated for exterior use. All court colours weather over years of UV — plan periodic recoats to keep colour and traction consistent.
Can it be used on walls or roof tiles?
Yes — masonry walls, brick walls and roof tiles are listed substrates alongside courts and decorative concrete.
How long before the court can be played on?
Confirm the drying, cure and reopening times with our technical team when programming works.
Does the court need slip texture?
Traction requirements vary by sport. Where a defined anti-slip profile is required, build the texture with GripSafe AP12 before colour-coating.
What preparation does an old court need?
Remove failed paint, biological growth and contamination; repair cracks and depressions; correct ponding. A sound, clean, dry surface is the whole game.
Start a conversation / ↗
Send the job, or ask for materials
Tell us what the surface is, where it is and what it has to withstand. Rayson replies with a system recommendation; for installation, the applicator for your area in Johor, Kuala Lumpur or Penang is introduced to quote the job.
Malaysia launch: 1 March 2027. Enquiries are welcome now; supply, site assessment and installation timing are confirmed for each project.