RAYSONHIGH PERFORMANCE COATINGSMALAYSIA
BM Discuss a project

Decorative finishes / IFS partner range

A surface.
An expression.Microcement, terrazzo and polished concrete in Johor, KL, Selangor and Penang: the IFS range, laid over Rayson layers.

IFS microcement, poured Japanese terrazzo, stone carpet, epoxy flake and polished concrete in Johor, KL, Selangor and Penang, over Rayson layers.

Discuss your finish ↗
Call Rayson+60 16-773 9178
Call Rayson

Enquiries open now · Malaysia launch: 1 March 2027 · Suitability and availability confirmed on enquiry.

Concept interior with warm microcement-like mineral surfaces
Concept imagery · not a completed partner project

How it comes together

One enquiry. Three specialists.

A decorative floor is only as good as what is under it, so every job joins three companies, each standing behind its own part.

  1. 01 · IFS

    The look

    IFS supplies the finish: MicroCrete® microcement, Japanese terrazzo, stone carpet, metallic and flake epoxy, or a polished concrete overlay.

  2. 02 · Rayson

    The base

    Rayson makes and specifies what goes underneath: SealForce waterproofing in wet areas and on porch roofs, PrimeBond primer on floors, each with a published data sheet.

  3. 03 · Applicator

    The installation

    An independent, Rayson-authorised applicator in your area, in Johor, Kuala Lumpur and Selangor, or Penang, contracts with you, inspects, quotes, installs and warrants the workmanship.

You make one enquiry to Rayson. Rayson brings the finish, the base and the applicator together; Rayson is not the installer and is not a party to the installation contract.

The partner collection / IFS

A finish to fall for.

Start with the look. We’ll help you discuss the finish, the space and the next step.

Concept cafe with fine ivory terrazzo flooring and an oak bench
Terrazzo inspiration · Concept imagery
Concept reception with large charcoal and terracotta aggregate in cream terrazzo
Terrazzo inspiration · Concept imagery
Concept courtyard dining space with muted terracotta terrazzo flooring
Terrazzo inspiration · Concept imagery

In focus / Terrazzo

Set the
tone.

Three moods. One place to begin.

01Soft neutral02Bold aggregate03Warm earth

Quiet colour. Subtle detail.

A fine aggregate look for a calm, understated interior.

Let the pattern speak.

Larger fragments bring a more expressive rhythm to the surface.

Warmth, from the ground up.

Earthy tones create an inviting backdrop for timber and natural light.

Discuss a terrazzo finish

These scenes are visual inspiration. Confirm actual IFS colours, aggregate and finish on a sample board for your project.

Look closer / Original IFS photography

Six finishes. Find your character.

See the photo gallery ↘

IFS finishes carry IFS’s own material terms. Rayson and IFS layer combinations require sample-board trials; independent applicators quote, install and warrant workmanship.

Photos from IFS

Explore IFS’s photographs, from the room to the surface detail. Select a finish to take a closer look.

MicrocementTerrazzoStone carpetMetallic epoxyFlake liningConcrete overlay
Seamless grey IFS MicroCrete microcement on the walls and floor of a living room with a white sofa View larger
Space reference · 01 / 03Photo: IFS
Terracotta-coloured IFS MicroCrete microcement floor in a home View larger
Space reference · 02 / 03Photo: IFS
Close-up of the soft, mottled grey texture of IFS MicroCrete microcement View larger
Surface detail · 03 / 03Photo: IFS

IFS partner finish / 01

MicroCrete® microcement

A continuous mineral look, with soft tonal variation across floors and walls.

Explore this finish

More views

Use these photographs as a starting point. Confirm colour, texture and pattern on a sample board for your project.

IFS Japanese terrazzo floor in a dining area with a curved bench and white chairs View larger
Space reference · 01 / 02Photo: IFS
IFS Japanese terrazzo counter top with white chips in a light grey base View larger
Space reference · 02 / 02Photo: IFS

IFS partner finish / 02

Japanese terrazzo

Visible aggregate brings pattern and character to the surface. See the floor and counter references.

Explore this finish

More views

Use these photographs as a starting point. Confirm colour, texture and pattern on a sample board for your project.

IFS stone carpet path along the side of a house, beside a bed of river pebbles View larger
Space reference · 01 / 02Photo: IFS
Close-up of IFS stone carpet: light pebbles bound in resin View larger
Surface detail · 02 / 02Photo: IFS

IFS partner finish / 03

Stone carpet

Individual stones create an expressive, textured surface. Explore the path and close-up views.

Explore this finish

More views

Use these photographs as a starting point. Confirm colour, texture and pattern on a sample board for your project.

Glossy dark IFS metallic epoxy floor reflecting armchairs in a living room View larger
Space reference · 01 / 03Photo: IFS
Close-up of silver IFS metallic epoxy with flowing swirls View larger
Surface detail · 02 / 03Photo: IFS
Bronze IFS metallic epoxy floor with a wave pattern and a glossy finish View larger
Surface detail · 03 / 03Photo: IFS

IFS partner finish / 04

Metallic Epoxy

Flowing patterns and reflected light give each surface its own visual movement.

Explore this finish

More views

Use these photographs as a starting point. Confirm colour, texture and pattern on a sample board for your project.

IFS Epoxy Flake Lining on a bathroom wall behind a basin and mirror View larger
Space reference · 01 / 04Photo: IFS
Shower step and walls in grey IFS Epoxy Flake Lining View larger
Space reference · 02 / 04Photo: IFS
Toilet finished in IFS Epoxy Flake Lining on the walls and floor View larger
Space reference · 03 / 04Photo: IFS
Close-up of grey IFS Epoxy Flake Lining View larger
Surface detail · 04 / 04Photo: IFS

IFS partner finish / 05

Epoxy Flake Lining

Fine flecks create an even, speckled appearance. See wall, shower and surface details.

Explore this finish

More views

Use these photographs as a starting point. Confirm colour, texture and pattern on a sample board for your project.

Close-up of the grey surface of an IFS polished concrete overlay View larger
Surface detail · 01 / 01Photo: IFS

IFS partner finish / 06

Polished concrete overlay

A closer look at the mineral character of the polished concrete overlay. Shown here as a surface detail.

Explore this finish

Use these photographs as a starting point. Confirm colour, texture and pattern on a sample board for your project.

Photography supplied by Industrial Floor & Systems (IFS). These are IFS finish references, not Rayson installations or Johor project records. IFS’s own material terms apply.

Photograph from IFS

Which finish where

Which finish for which space

A first guide for homes, cafés and shops. The applicator confirms every choice at the site visit and on a sample board.

SpaceMicroCrete® microcementJapanese terrazzoStone carpetFlake and metallic epoxyPolished concrete overlay
Living rooms and bedrooms
Bathrooms and showers
Kitchens
Feature walls and stairs
Cafés, shops and showrooms
Car porches and driveways
Garden paths and pool surrounds
Balconies with a room below
Over firmly bonded tiles

SuitedSuited, with Rayson waterproofing underneathAsk: confirmed at the site visit

How you get your finish

Your finish,
made clear.

Three decisions before work begins.

  1. 01 / Your brief

    Show us your space.

    Send three photos: the room, the existing surface and a look you love. Add your location, approximate area and target date.

  2. 02 / The sample board

    See it. Feel it. Choose.

    Discuss colour and texture on a physical sample. Any proposed IFS finish over Rayson layers needs a sample-board trial before confirmation.

  3. 03 / The written plan

    Agree the details.

    The independent applicator checks the site and quotes per square foot. Agree preparation, the finish, timing and warranty responsibilities before work starts.

Then, on site

  1. Prepare
  2. Apply
  3. Cure
  4. Handover

Your applicator confirms the installation and curing schedule, care guidance and workmanship warranty. IFS and Rayson each provide terms for their own materials.

Have a look in mind?

A photograph is a good place to start.

Share your space
Illustrative decorative material textures
Illustrative material study · not actual IFS samples

Clear responsibilities

Each layer.
The right expertise.

The decorative finish

Industrial Floor & Systems Pte. Ltd (IFS) provides the named partner range: MicroCrete® microcement, Japanese terrazzo, stone carpet, Metallic Epoxy, Epoxy Flake Lining and polished concrete overlay. IFS finishes carry IFS’s own material terms; they are not Rayson products.

Rayson materials

Rayson specifies, supplies and warrants its own materials. Any proposed combined Rayson and IFS build-up requires sample-board trials before confirmation.

Independent installation

The independent authorised applicator contracts with you, quotes, invoices and warrants the workmanship. Rayson is not the installer and is not a party to the installation contract.

Visit IFS ↗
The practical details

Questions about decorative finishes.

Are IFS finishes Rayson products?

No. The decorative finishes come from the partner range of Industrial Floor & Systems Pte. Ltd (IFS) and carry IFS’s own material terms. The layers underneath, such as waterproofing membranes and primers, are Rayson materials with published technical data sheets.

What is MicroCrete®?

MicroCrete® is IFS’s microcement: a thin, cement-based coating for floors, walls and other surfaces that gives a seamless finish. IFS describes it as resistant to stains, scratches and moisture, and able to go over existing concrete, tile or wood.

What is Japanese terrazzo?

IFS’s collection of terrazzo products made in Japan: chips of marble or granite set in a binder, poured in place and polished smooth, so the floor has no grout lines, chosen for durability, low maintenance and design choice.

Who installs the finish and who warrants the work?

An independent, Rayson-authorised applicator in your area, in Johor, Kuala Lumpur and Selangor, or Penang, contracts with you, inspects, quotes, installs and warrants the workmanship. Rayson warrants Rayson materials and is not the installer or a party to the installation contract.

Where are the IFS finishes installed?

In Johor, around Johor Bahru and in Muar, Batu Pahat and Yong Peng; in Kuala Lumpur and the Klang Valley, including Petaling Jaya, Shah Alam and Subang Jaya; and in Penang, island and mainland, each by the Rayson-authorised applicator for the area. Elsewhere is confirmed per enquiry.

Can microcement go in a bathroom or shower?

Yes, on walls and floors, with a waterproofing membrane underneath. Microcement is a finish, not a membrane: the applicator installs Rayson SealForce WB20 and flood-tests it first. The combined build-up is confirmed on a sample board before your job.

Can decorative finishes go over existing tiles?

Microcement, metallic epoxy and the concrete overlay can go over tiles that are still firmly bonded, with a bonding primer; loose tiles come out first. For terrazzo and stone carpet, the applicator checks the floor base before proposing a method.

Can I see a finish before I choose?

Yes, on a sample board: colour and texture are chosen on a board, and the build-up over your surface is confirmed on it before the job starts.

How much do decorative finishes cost in Malaysia?

They are quoted per square foot after inspection, because the existing surface, the chosen finish and whether a waterproofing membrane is needed decide the cost. Rayson publishes no price list.

Start a conversation / ↗

What finish do you imagine?

Share your space, the look you like and your required date. We’ll discuss the next steps.

Malaysia launch: 1 March 2027. Enquiries are welcome now; supply, site assessment and installation timing are confirmed for each project.

Thank you. Your enquiry has been received and we reply within one working day, Monday to Friday.

WhatsApp