Car park epoxy flooring in Malaysia: the FloorGuard R50 textured deck system for basements, covered decks and ramps, by Rayson-authorised applicators.
We reply within one working day, Monday to Friday.
Rayson-authorised applicators in Johor, Kuala Lumpur and the Klang Valley, and Penang. Materials and data sheets nationwide.
For basements and covered decks, an epoxy broadcast system: Rayson’s FloorGuard R50 data sheet lists multi-storey and underground car park decks, applied over PrimeBond E20 primer, broadcast with aggregate for grip and sealed with a further R50 coat. Sun-exposed top decks need a UV-stable system instead.
Because most are painted, not coated with a floor system. Tyres turning on the spot, oil and water from wet cars lift a thin paint from unprepared concrete, and smooth ramps turn slippery in the rain. The broadcast system is built thicker and textured, on a ground and primed slab.
The survey looks at where the wear is worst: the turns at the foot of the ramps, the entrance, and the bays nearest the lifts.
The same R50 broadcast system with more texture: aggregate broadcast into the R50 to refusal and sealed, so tyres and shoes grip when the ramp is wet. The texture is set zone by zone in the specification.
Ramps take the hardest wear in the building, so the specification sets their texture and build apart from the parking bays.
Yes, level by level or zone by zone. Bays are closed in sections with the management office, and each section reopens when the specification says it can take cars; the R50 data sheet gives seven days to final cure.
Condo and office car parks are planned with the management corporation or the JMB: notices to residents, working hours, and where cars park in the meantime.
Basement slabs are moisture-tested first. The PrimeBond E20 primer accepts damp concrete up to 5% moisture, with no standing water; a slab wetter than that, or with water coming through, is dealt with before any coating goes down.
A coating cannot hold back water pushing up through a slab; it only lifts. That is why the moisture test comes before the quotation.
| Compared on | Rayson system | Finish | Why it fits |
|---|---|---|---|
| Parking bays and driving aisles | FloorGuard R50 broadcast system over PrimeBond E20 | Textured, sealed with R50 | Listed for multi-storey and underground car park decks |
| Ramps and turns | The same system with more texture | Aggregate to refusal, sealed | Grip for tyres and shoes in the wet |
| Pedestrian walkways | GripSafe AP12 | Quartz anti-slip texture | One product for walkways and pedestrian ramps |
| Open, sun-exposed top deck | Outside the current range | Not quoted | Epoxy yellows and chalks in the sun |
A first guide. The survey confirms the system, texture and programme for your car park.
Moisture and bond tests, the worst wear points, the drainage, and how the building parks while the work runs.
System, texture by zone, line marking and the data sheets, in writing, with the programme level by level.
Grinding, oil removal and repairs, PrimeBond E20, then R50 broadcast with aggregate and sealed, section by section.
Lines and bay numbers marked, and each section reopened when the specification allows.
Per square foot, quoted after a survey. Five things decide it: the area by level, the state of the slab (old paint, oil, cracks, joints and moisture), the texture by zone, the line marking, and the programme around the building’s parking. Rayson publishes no price list; contractors with their own crews can buy the systems direct.
Independent, Rayson-authorised applicators in Johor, Kuala Lumpur and the Klang Valley, and Penang. Sites elsewhere are confirmed per enquiry; materials and data sheets are supplied nationwide.
The build-up, top to bottom · diagram, not to scale
Pedestrian walkways: GripSafe AP12. Open, sun-exposed top decks: outside the current range.
Rayson PrimeBond E20 is a two-component, medium-viscosity, solvent-free epoxy bonding primer that anchors resin floor systems to concrete, screed, asphalt and prepared metal — on dry or damp substrates.
Specifications →
Rayson FloorGuard R50 is a two-component, solvent-free high-solids epoxy floor coating that cures to a smooth gloss — or a slip-resistant finish when broadcast with aggregate — for concrete and screed under normal to medium-heavy wear.
Specifications →
Rayson GripSafe AP12 is a one-pack, self-crosslinking acrylic primer filler loaded with 0.5–1.5 mm silicate quartz aggregate that builds an anti-slip texture directly onto concrete and asphalt.
Specifications →The system is specified by the company that makes the material, and installed by an independent applicator Rayson has authorised, not chosen from whatever a supplier had on the shelf that week.
Every Rayson material on your floor or roof has a published technical data sheet. You can read what went in, and so can your consultant.
Rayson warrants the material as its maker. The authorised applicator, an independent company that contracts with you, warrants the workmanship. Each warranty is issued by the company responsible for it.
The products, data sheets and application methods are the ones Rayson publishes in Singapore. Nothing is rebadged for Malaysia.
Contractors and facility teams buy the same materials direct from the maker, with application guidance. The applicator is there when you want the job done for you.
Each with the Rayson layers it uses
All industries ↗Forklift aisles, racking zones and loading bays in warehouses and distribution centres, in self-levelling or roller-applied epoxy.
Racking and storage zones: FloorGuard R50 roller coats. Heavy traffic with spillage: PurScreed PC70.
Quoted after inspectionService bays, wash bays and car showrooms: hard-wearing epoxy in the workshop, a colour-stable finish in the showroom.
Wash bays and ramps: R50 broadcast with aggregate. Showrooms: UraForce WB58 topcoat over R50. Heaviest bays: LevelShield SL120.
Quoted after inspectionRamps, walkways, porches, pool decks and wet rooms made safe underfoot.
Coated floors: quartz broadcast into the epoxy finish. Glazed tiles: a tile treatment, quoted on inspection.
Quoted after inspectionNot with this system. Epoxy yellows and chalks in the sun, and a top deck over occupied floors also has to keep water out, so open, sun-exposed decks are outside the current Malaysian range. The survey marks them rather than quoting the wrong system.
The broadcast system is textured to grip: aggregate is broadcast into the R50 and sealed, with more texture on ramps and turns. Pedestrian walkways can take GripSafe AP12.
Rayson warrants the materials as their maker; the Rayson-authorised applicator that lays the floor warrants its workmanship. Both are written into the quotation.
Tell us what the surface is, where it is and what it has to withstand. Rayson replies with a system recommendation; for installation, the applicator for your area in Johor, Kuala Lumpur or Penang is introduced to quote the job.
Malaysia launch: 1 March 2027. Enquiries are welcome now; supply, site assessment and installation timing are confirmed for each project.