Anti-slip floor treatment in Johor Bahru for ramps, porches, walkways and wet rooms: GripSafe AP12 on concrete, textured epoxy, by an authorised applicator.
We reply within one working day, Monday to Friday.
Also in Kuala Lumpur and the Klang Valley, and Penang, through authorised applicators there.
An anti-slip treatment gives a smooth floor a texture that grips underfoot when wet. On concrete and asphalt, GripSafe AP12 builds it in one product with quartz; coated floors get quartz broadcast into the epoxy; glazed tiles get a separate tile treatment, quoted on inspection.
Yes. It is Rayson’s one-pack acrylic primer filler loaded with 0.5 to 1.5 mm quartz, for concrete and asphalt walkways, ramps, playgrounds and courts.
The quartz is blended in at the factory, so every pass lays the same texture with no loose grit to broadcast. It is non-yellowing and made for outdoor use as well as indoors.
Glazed tiles cannot be coated reliably, so they are treated rather than coated. The applicator quotes a tile treatment on inspection; it is not a Rayson product and is said so on the quotation.
The applicator can try the treatment on a small area first, so you can see and feel the result before the whole floor is done.
On a walkway or porch, years, if it is cleaned with a brush rather than a pressure jet that strips it. The handover explains the cleaning.
Texture wears fastest where people turn and stop, such as the top of a ramp and the entrance step; those spots can be treated again on their own.
If someone has slipped, or the floor feels slick under a wet shoe, it needs texture. The applicator checks the floor wet at the inspection, and the finished floor is walked wet before handover.
Care homes, kindergartens and commercial kitchens are where a fall costs most, so they are worth treating before the first one.
| Compared on | GripSafe AP12 | Quartz broadcast into epoxy | Tile treatment | Anti-slip tape or mats |
|---|---|---|---|---|
| Surface | Concrete, asphalt, stone, unglazed tiles | Floors coated in epoxy | Glazed or polished tiles | Steps and small spots |
| How it grips | 0.5 to 1.5 mm quartz, blended in | Quartz in the finish coat | A treated tile surface | A gritty strip or a mat |
| Rayson product | Yes | Yes, the epoxy | No: quoted by the applicator | No |
| Upkeep | Brush clean, no pressure jet | Brush or mop | As the applicator advises | Replaced when worn or lifting |
| Best for | Ramps, walkways, porches, courts | Kitchens, workshops, coated porches | Bathrooms and pool surrounds | A quick fix on a step |
A first guide. The applicator confirms the method for your surface on site.
What the floor is made of, where the water comes from and who walks on it decides the method.
Algae and grime removed, the surface keyed and primed where a coating goes on.
GripSafe AP12 on concrete and asphalt; quartz broadcast into the epoxy finish on coated floors; a tile treatment on glazed tiles, quoted separately.
Walked wet before handover, with the cleaning regime explained so the texture lasts.
Per square foot, quoted after inspection. Four things decide it: the surface (concrete, coated floor or glazed tile), the area, the cleaning and preparation (algae and grime removed first), and access. A GripSafe treatment on concrete is a quick job; a textured epoxy finish is part of a floor coating job. Rayson publishes no price list.
Also in Kuala Lumpur and the Klang Valley, and Penang, through Rayson-authorised applicators there; availability confirmed per enquiry.
The build-up, top to bottom · diagram, not to scale
Coated floors: quartz broadcast into the epoxy finish. Glazed tiles: a tile treatment, quoted on inspection.
Rayson GripSafe AP12 is a one-pack, self-crosslinking acrylic primer filler loaded with 0.5–1.5 mm silicate quartz aggregate that builds an anti-slip texture directly onto concrete and asphalt.
Specifications →
Rayson FloorGuard R50 is a two-component, solvent-free high-solids epoxy floor coating that cures to a smooth gloss — or a slip-resistant finish when broadcast with aggregate — for concrete and screed under normal to medium-heavy wear.
Specifications →The system is specified by the company that makes the material, and installed by an independent applicator Rayson has authorised, not chosen from whatever a supplier had on the shelf that week.
Every Rayson material on your floor or roof has a published technical data sheet. You can read what went in, and so can your consultant.
Rayson warrants the material as its maker. The authorised applicator, an independent company that contracts with you, warrants the workmanship. Each warranty is issued by the company responsible for it.
The products, data sheets and application methods are the ones Rayson publishes in Singapore. Nothing is rebadged for Malaysia.
Contractors and facility teams buy the same materials direct from the maker, with application guidance. The applicator is there when you want the job done for you.
Each with the Rayson layers it uses
All jobs in Johor ↗Garages, kitchens, living rooms and porches: plain coloured epoxy by Rayson, IFS metallic and flake finishes over Rayson primer.
Metallic and flake finishes: IFS Metallic Epoxy or Epoxy Flake Lining, over the same primer.
Quoted after inspectionSeamless, cleanable floors done overnight or between tenancies, with colour that lasts under daylight.
GripSafe AP12 texture at the entrance and wet zones.
Quoted after inspectionSurfaces that are rained on and walked on, with a room underneath that must stay dry.
Under new tiles: SealForce WB20 beneath a protected screed.
Quoted after inspectionUsually in part. A walkway or ramp can be done in halves so one side stays open; GripSafe AP12 is touch dry in 30 to 60 minutes at 25 °C and fully cured in a day, and each half reopens when the data sheet allows.
Yes. Rayson sells GripSafe AP12 direct with the data sheet and application guidance; the authorised applicator is there when you want the job done for you.
Rayson warrants its materials as their maker; the Rayson-authorised applicator warrants its workmanship. A tile treatment carries the applicator’s terms only.
Tell us what the surface is, where it is and what it has to withstand. Rayson replies with a system recommendation; for installation, the applicator for your area in Johor, Kuala Lumpur or Penang is introduced to quote the job.
Malaysia launch: 1 March 2027. Enquiries are welcome now; supply, site assessment and installation timing are confirmed for each project.