Epoxy flooring in KL and Selangor: factories and warehouses in Shah Alam, Klang and Port Klang, car parks and homes, by a Rayson-authorised applicator.
We reply within one working day, Monday to Friday.
A Rayson-authorised applicator in Kuala Lumpur and the Klang Valley. In Johor: Factory and warehouse epoxy flooring in Johor. Also in Penang.
Forklift aisles and loading bays: LevelShield SL120 self-levelling epoxy over PrimeBond E20. Storage halls, workshops and garages: FloorGuard R50 roller coat, two coats. Hot washdown or chemical spillage: PurScreed PC70 polyurethane-cement. Rayson names the system after looking at the slab and the traffic.
Kuala Lumpur, Petaling Jaya, Shah Alam, Subang Jaya, Puchong, and Klang with Port Klang. Sites further out, such as Rawang, Bangi or Semenyih, are confirmed per enquiry, depending on the size of the job.
Anywhere in Malaysia, contractors with their own crews can order the Rayson systems direct, with the data sheets and application guidance.
Usually, in sections: the floor is split into bays, each laid and cured while the rest keeps working, often over weekends and public holidays. The cure times on the data sheets decide when racking and forklifts go back.
The epoxy primer and roller coat reach their final cure in seven days, so the section programme is agreed before work starts, with the aisles and loading bays scheduled around deliveries.
Yes. The data sheets ask for concrete at least 28 days old with a moisture content of 5% or less, sound enough to reach 1.5 N/mm² in a pull-off test. A slab that is still wet, or has rising damp, blisters the coating.
The applicator measures moisture and bond at the site visit, so a new building’s slab is coated only when it is ready, and an old one is ground and repaired first.
A garage or covered car porch, yes: FloorGuard R50 over PrimeBond E20, two coats. A car porch open to the sun, no: epoxy yellows and chalks outdoors, as the R50 data sheet says. Condo basements and multi-storey car park decks take R50 broadcast with aggregate for grip; open, sun-exposed top decks are outside the range.
For a home floor that should look decorative rather than plain, the IFS flake and metallic finishes go over the same Rayson primer.
| Compared on | The Rayson system | Why it fits |
|---|---|---|
| Warehouse aisles and loading bays | LevelShield SL120 self-levelling over PrimeBond E20 | Seamless and hard-wearing under forklifts |
| Storage halls, workshops, garages | FloorGuard R50, two coats, over PrimeBond E20 | Seals and colours a sound slab |
| Food plants and central kitchens | PurScreed PC70 polyurethane-cement, 1.5 to 3 mm | Takes hot washdown, steam and spillage |
| Car park decks and basements | FloorGuard R50 broadcast with aggregate, sealed | Textured for grip on ramps and aisles |
| Showrooms, offices, schools | FloorGuard R50 under UraForce WB58 | Colour that holds under daylight, low odour |
| Electronics and data rooms | StaticGuard CX90 conductive epoxy | Tested for ESD after cure |
A first guide. The specification confirms the system against your traffic, chemicals and washdown.
Moisture and bond tests, what runs on the floor, the chemicals and the cleaning, and when each area can close.
The system and thickness for each zone, with the data sheets, in writing, and the section programme.
Grinding or shot blasting, crack and joint repair, PrimeBond E20, then the body coat or screed to the data sheet.
Each section back in use when the data sheets allow, with the data sheets and the warranties for your file.
Per square foot, quoted after inspection. Five things decide it: the area, the preparation (grinding, repairs and moisture), the system and its thickness (a roller coat at 0.3 to 0.5 kg/m² a coat is a different quantity from a self-levelling floor at 1.6 to 2.0 kg/m²), the section programme around your operation, and access. Rayson publishes no price list. Contractors with their own crews can order the materials direct.
An independent, Rayson-authorised applicator in Kuala Lumpur and the Klang Valley; sites further out in Selangor are confirmed per enquiry. In Johor: Factory and warehouse epoxy flooring in Johor. Also in Penang.
The build-up, top to bottom · diagram, not to scale
Storage halls, workshops and garages: FloorGuard R50, two coats. Hot washdown: PurScreed PC70. Showrooms: R50 under UraForce WB58.
Rayson PrimeBond E20 is a two-component, medium-viscosity, solvent-free epoxy bonding primer that anchors resin floor systems to concrete, screed, asphalt and prepared metal — on dry or damp substrates.
Specifications →
Rayson FloorGuard R50 is a two-component, solvent-free high-solids epoxy floor coating that cures to a smooth gloss — or a slip-resistant finish when broadcast with aggregate — for concrete and screed under normal to medium-heavy wear.
Specifications →
Rayson LevelShield SL120 is a solvent-free, two-component, self-smoothing epoxy floor system that delivers a seamless wearing surface with medium to heavy chemical resistance and high mechanical strength.
Specifications →
Rayson PurScreed PC70 is a four-part, water-based polyurethane-cement self-smoothing screed installed at 1.5–3 mm for medium to heavy-duty industrial floors with high chemical resistance.
Specifications →
Rayson UraForce WB58 is a two-component, water-based aliphatic polyurethane dispersion topcoat, crosslinked with a PUR hardener, for abrasion-resistant coloured finishes on concrete, metal and mineral surfaces.
Specifications →The system is specified by the company that makes the material, and installed by an independent applicator Rayson has authorised, not chosen from whatever a supplier had on the shelf that week.
Every Rayson material on your floor or roof has a published technical data sheet. You can read what went in, and so can your consultant.
Rayson warrants the material as its maker. The authorised applicator, an independent company that contracts with you, warrants the workmanship. Each warranty is issued by the company responsible for it.
The products, data sheets and application methods are the ones Rayson publishes in Singapore. Nothing is rebadged for Malaysia.
Contractors and facility teams buy the same materials direct from the maker, with application guidance. The applicator is there when you want the job done for you.
Each with the Rayson layers it uses
All industries ↗Forklift aisles, racking zones and loading bays in warehouses and distribution centres, in self-levelling or roller-applied epoxy.
Racking and storage zones: FloorGuard R50 roller coats. Heavy traffic with spillage: PurScreed PC70.
Quoted after inspectionHot washdown, wet process and dry store floors for food and beverage plants, with coves and drains detailed.
Dry stores and packing: FloorGuard R50 or LevelShield SL120 over PrimeBond E20. Walls: UraForce WB58.
Quoted after inspectionBasement and covered car park decks, ramps and walkways in condos, malls, offices and factories, with a textured epoxy deck system.
Pedestrian walkways: GripSafe AP12. Open, sun-exposed top decks: outside the current range.
Quoted after inspectionService bays, wash bays and car showrooms: hard-wearing epoxy in the workshop, a colour-stable finish in the showroom.
Wash bays and ramps: R50 broadcast with aggregate. Showrooms: UraForce WB58 topcoat over R50. Heaviest bays: LevelShield SL120.
Quoted after inspectionCooking lines, dishwash and prep areas in central, hotel and restaurant kitchens: PU-cement where it is hot, epoxy where it is dry.
Cold prep, stores and corridors: FloorGuard R50 broadcast with aggregate, over PrimeBond E20.
Quoted after inspectionESD areas, production halls, wet and chemical rooms, warehouses and car parks in electronics and semiconductor plants, zone by zone.
Outside the ESD programme: LevelShield SL120. Wet and chemical rooms: PurScreed PC70. Car parks: FloorGuard R50 broadcast system.
Quoted after inspectionAn independent, Rayson-authorised applicator in Kuala Lumpur and the Klang Valley, including Petaling Jaya, Shah Alam, Subang Jaya and Klang. It inspects, quotes, contracts with you and warrants the workmanship; Rayson makes the materials and is not the installer. Sites further out in Selangor are confirmed per enquiry.
Yes. Order through Rayson Malaysia (Epovex Coatings Sdn. Bhd.) by WhatsApp or the form; supply and delivery are confirmed for each order, with the data sheets, coverage figures and application guidance.
Over sound, well-bonded old epoxy, yes, after grinding: PrimeBond E20 lists sound existing epoxy flooring among its substrates. Where the old coating is peeling, it comes off first.
Rayson warrants the materials as their maker; the Rayson-authorised applicator warrants the workmanship. Both are written into the quotation.
Tell us what the surface is, where it is and what it has to withstand. Rayson replies with a system recommendation; for installation, the applicator for your area in Johor, Kuala Lumpur or Penang is introduced to quote the job.
Malaysia launch: 1 March 2027. Enquiries are welcome now; supply, site assessment and installation timing are confirmed for each project.