IFS epoxy flake and Metallic Epoxy floors for JB homes, garages, showrooms and cafés, over Rayson primer by an authorised applicator. Quote per sq ft.
We reply within one working day, Monday to Friday.
Outside Johor: Epoxy flake and metallic epoxy in KL, Selangor and Penang, through the authorised applicators there.
Metallic epoxy is an epoxy floor coating with metallic pigments, worked by hand into a seamless, liquid or marbled finish. In Johor Bahru, IFS Metallic Epoxy is laid over Rayson PrimeBond E20 primer by a Rayson-authorised applicator, after the colour and pattern are chosen on a sample board.
Photos from IFS
Photos supplied by IFS, not Johor jobs. Your colour, texture and pattern are chosen on a sample board.
A glossy finish can be slippery when wet, like any smooth floor. IFS metallic finishes also come matte or velvety, and IFS Epoxy Flake Lining is slip-resistant; for entrances and wet zones the applicator recommends the finish on the sample.
In dry rooms a gloss finish is easy to mop and shows the metallic effect best. Where water comes in from outside, a mat and a satin or flake finish keep the floor safe.
Any epoxy floor scratches under grit and dragged furniture, and epoxy can yellow where strong sunlight falls on it. Felt pads, a mat at the door and the right clear coat where daylight reaches the floor keep it looking new.
The applicator checks where the sun falls at the site visit and specifies the clear coat the system calls for there. Grit is the usual cause of fine scratches, so it is swept away rather than ground in.
Over tiles that are firmly bonded, yes, with the grout lines filled and a bonding primer. The applicator taps every tile first; a hollow tile is removed.
Unfilled grout lines show through a thin coat as a grid, so they are filled and the floor primed before the metallic layers. Door clearances are checked too, though the build-up is thin.
Metallic epoxy gives a flowing, liquid or marbled look; flake epoxy scatters coloured flakes for a speckled finish with more grip. Both are IFS finishes over Rayson primer, and both are chosen on a sample board.
Living rooms, showrooms and feature floors tend to suit metallic; garages, kitchens, utility rooms and wet zones tend to suit flake, which hides dirt and grips better.
| Compared on | IFS Metallic Epoxy | IFS Epoxy Flake Lining | Plain epoxy (Rayson) | Marble or marble-look tiles |
|---|---|---|---|---|
| The look | Liquid, marbled, one of a kind | Speckled coloured flakes | An even colour | Veining in slabs or tiles |
| Joints | Seamless | Seamless | Seamless | Joints and grout lines |
| Grip when wet | Gloss is slippery; matte or velvety helps | Slip-resistant | Texture can be added | Polished stone is slippery |
| Over existing tiles | Yes, if firmly bonded, with a bonding primer | Yes, if firmly bonded, with a bonding primer | Yes, if firmly bonded, with a bonding primer | Usually hacked out |
| Best rooms | Living rooms, showrooms, feature floors | Garages, kitchens, utility rooms | Garages, kitchens, shops | Living rooms and lobbies |
A first guide. The applicator confirms the right finish for your room on site.
Colour, effect and sheen chosen on a sample board and checked in the light of your room, because metallic finishes change with the light.
Grinding, crack and joint repair and a moisture check, then Rayson PrimeBond E20 primer.
The coats of the IFS metallic or flake system, worked by hand to the pattern on the sample, then the clear coat the system specifies.
Foot traffic and furniture follow the cure times on the data sheets; the cleaning regime is explained at handover.
Per square foot, quoted after inspection. Five things decide it: the area, the state of the floor (grinding, cracks and moisture), tiles to fill and prime, metallic or flake and the pattern, and the clear coat where daylight falls. Repairs to the floor are priced as their own step. Rayson publishes no price list.
In Kuala Lumpur, Selangor or Penang: Epoxy flake and metallic epoxy in KL, Selangor and Penang, through the Rayson-authorised applicators there.
The build-up, top to bottom · diagram, not to scale
Firmly bonded tiles: grout lines filled and a bonding primer first.
Rayson PrimeBond E20 is a two-component, medium-viscosity, solvent-free epoxy bonding primer that anchors resin floor systems to concrete, screed, asphalt and prepared metal — on dry or damp substrates.
Specifications →The decorative finish itself is an IFS product, not a Rayson one.
The system is specified by the company that makes the material, and installed by an independent applicator Rayson has authorised, not chosen from whatever a supplier had on the shelf that week.
Every Rayson material on your floor or roof has a published technical data sheet. You can read what went in, and so can your consultant.
Rayson warrants the material as its maker. The authorised applicator, an independent company that contracts with you, warrants the workmanship. Each warranty is issued by the company responsible for it.
The products, data sheets and application methods are the ones Rayson publishes in Singapore. Nothing is rebadged for Malaysia.
Contractors and facility teams buy the same materials direct from the maker, with application guidance. The applicator is there when you want the job done for you.
Each with the Rayson layers it uses
All jobs in Johor ↗Garages, kitchens, living rooms and porches: plain coloured epoxy by Rayson, IFS metallic and flake finishes over Rayson primer.
Metallic and flake finishes: IFS Metallic Epoxy or Epoxy Flake Lining, over the same primer.
Quoted after inspectionSeamless, cleanable floors done overnight or between tenancies, with colour that lasts under daylight.
GripSafe AP12 texture at the entrance and wet zones.
Quoted after inspectionThe polished concrete look over your existing floor or wall, without breaking it out: the IFS overlay on a prepared base.
Wet areas: the applicator confirms whether a SealForce WB20 membrane goes underneath first.
Quoted after inspectionAs a finish on walls and floors, yes, and IFS’s own photos show it in bathrooms. It is not a waterproofing membrane: the waterproofing under a bathroom floor is checked first, and where it is needed the applicator confirms the membrane and the combined build-up on a sample board.
The metallic and flake finishes are IFS products (Industrial Floor & Systems Pte. Ltd) and carry IFS’s own terms. The primer under them is Rayson PrimeBond E20, with a published data sheet, and the combined build-up is confirmed on a sample board before your job.
Several working days: the preparation and primer, the base coat, the metallic or flake coat and the clear coat each cure in turn, and furniture goes back after the cure time on the data sheet. The applicator sets out the programme in the quotation.
Rayson warrants its primer as the maker; IFS’s terms cover the finish; the Rayson-authorised applicator warrants the workmanship. All three are written into the quotation.
Tell us what the surface is, where it is and what it has to withstand. Rayson replies with a system recommendation; for installation, the applicator for your area in Johor, Kuala Lumpur or Penang is introduced to quote the job.
Malaysia launch: 1 March 2027. Enquiries are welcome now; supply, site assessment and installation timing are confirmed for each project.