Epoxy and PU floor coating for shops, cafés and showrooms in Johor Bahru, laid overnight or between tenancies by an authorised applicator on Rayson materials.
We reply within one working day, Monday to Friday.
Also in Kuala Lumpur and the Klang Valley, and Penang, through authorised applicators there.
A commercial epoxy floor is a primer, an epoxy body coat and a polyurethane topcoat over the slab or firmly bonded tiles: seamless, quick to mop and made for chairs, trolleys and daily cleaning. A UV-stable topcoat keeps the colour in shopfront daylight.
For a plain coloured floor on a prepared slab, often yes, with foot traffic the next morning and fittings after cure. The quotation states what can be done in one night and what needs two.
Larger floors are done in sections over several nights, or in one go during a fit-out before the fittings arrive.
An epoxy on its own yellows in daylight. The UraForce WB58 polyurethane topcoat is aliphatic and UV-stable, which is why it goes on every shopfront floor.
The topcoat is also the surface that takes the chairs, the trolleys and the daily mopping, so the colour underneath stays protected.
GripSafe AP12 builds an anti-slip texture into the entrance zone in one product; the rest of the floor can stay smooth for cleaning.
The textured zone goes where rainwater and wet feet actually reach, and a mat inside the door helps the rest of the floor stay dry.
Over firmly bonded tiles, yes, after keying, filling the grout lines and a bonding primer. The applicator taps every tile first; hollow ones are taken out and patched.
Coating over tiles avoids hacking, with its dust and noise, which matters in a mall or a row of shops that keep trading.
| Compared on | Epoxy with a UraForce WB58 topcoat | Epoxy alone | New tiles | IFS microcement |
|---|---|---|---|---|
| Joints | Seamless | Seamless | A grout line at every tile | Seamless |
| The look | An even colour | An even colour | The pattern of tiles and grout | Soft, mineral, hand-trowelled |
| Topcoat | Aliphatic PU, non-yellowing | None: epoxy yellows in daylight | None needed | An IFS sealer |
| Over existing tiles | Yes, if firmly bonded | Yes, if firmly bonded | Hacked out, or tiled over | Yes, if firmly bonded |
| Programme | Often one night for a plain floor | Often one night for a plain floor | Days, with hacking and curing | Several working days |
| Upkeep | Mopped; the topcoat protects | Mopped | Grout cleaned and resealed | Mild cleaner; sealer renewed as the system advises |
A first guide. The applicator confirms the right floor for your shop on site.
The floor, the trading hours and the opening date set the plan: overnight, in sections, or during the fit-out.
Degrease, grind or key, repair, then E20 primer.
R50 body coat in the chosen colour, WB58 topcoat for daylight and cleaning, GripSafe AP12 texture at the entrance and wet zones.
Foot traffic the next morning, fittings after cure; data sheets and the warranty in the handover file.
Per square foot, quoted after inspection. Five things decide it: the area, the state of the floor or tiles, the colour and finish, the anti-slip zones, and the programme. Night work and sectioning cost more than a clear floor during a fit-out. Rayson publishes no price list.
Also in Kuala Lumpur and the Klang Valley, and Penang, through Rayson-authorised applicators there; availability confirmed per enquiry.
The build-up, top to bottom · diagram, not to scale
GripSafe AP12 texture at the entrance and wet zones.
Rayson PrimeBond E20 is a two-component, medium-viscosity, solvent-free epoxy bonding primer that anchors resin floor systems to concrete, screed, asphalt and prepared metal — on dry or damp substrates.
Specifications →
Rayson FloorGuard R50 is a two-component, solvent-free high-solids epoxy floor coating that cures to a smooth gloss — or a slip-resistant finish when broadcast with aggregate — for concrete and screed under normal to medium-heavy wear.
Specifications →
Rayson UraForce WB58 is a two-component, water-based aliphatic polyurethane dispersion topcoat, crosslinked with a PUR hardener, for abrasion-resistant coloured finishes on concrete, metal and mineral surfaces.
Specifications →
Rayson GripSafe AP12 is a one-pack, self-crosslinking acrylic primer filler loaded with 0.5–1.5 mm silicate quartz aggregate that builds an anti-slip texture directly onto concrete and asphalt.
Specifications →The system is specified by the company that makes the material, and installed by an independent applicator Rayson has authorised, not chosen from whatever a supplier had on the shelf that week.
Every Rayson material on your floor or roof has a published technical data sheet. You can read what went in, and so can your consultant.
Rayson warrants the material as its maker. The authorised applicator, an independent company that contracts with you, warrants the workmanship. Each warranty is issued by the company responsible for it.
The products, data sheets and application methods are the ones Rayson publishes in Singapore. Nothing is rebadged for Malaysia.
Contractors and facility teams buy the same materials direct from the maker, with application guidance. The applicator is there when you want the job done for you.
Each with the Rayson layers it uses
All jobs in Johor ↗Garages, kitchens, living rooms and porches: plain coloured epoxy by Rayson, IFS metallic and flake finishes over Rayson primer.
Metallic and flake finishes: IFS Metallic Epoxy or Epoxy Flake Lining, over the same primer.
Quoted after inspectionSeamless cement finish over floors, walls and showers, with Rayson waterproofing underneath where it is wet.
Dry floors: PrimeBond E20 primer in place of the membrane, or a bonding primer over firmly bonded tiles.
Quoted after inspectionRamps, walkways, porches, pool decks and wet rooms made safe underfoot.
Coated floors: quartz broadcast into the epoxy finish. Glazed tiles: a tile treatment, quoted on inspection.
Quoted after inspectionYes. Contractors with their own crews can order Rayson materials with the data sheets and application guidance; the authorised applicator is there when you want the job done for you.
Rayson warrants the materials as their maker; the Rayson-authorised applicator warrants its workmanship. Both are written into the quotation.
Tell us what the surface is, where it is and what it has to withstand. Rayson replies with a system recommendation; for installation, the applicator for your area in Johor, Kuala Lumpur or Penang is introduced to quote the job.
Malaysia launch: 1 March 2027. Enquiries are welcome now; supply, site assessment and installation timing are confirmed for each project.